Emissions treatment

BY TECHNOLOGY

EMISSIONS TREATMENT SOLUTIONS BY TECHNOLOGY

We offer a wide range of technological solutions that cover all of the needs and cases that may arise in large industries. We approach each project by gaining an overview of the situation and conducting a thorough study of the specific characteristics of your facility, before implementing the most suitable solutions for each case.

RTO

Regenerative Thermal Oxidation (RTO) is a technology used to eliminate Volatile Organic Compounds (VOCs) in gaseous emissions.

RTO systems are extremely efficient, which means they are highly recommended for a wide variety of industrial applications. Moreover, RTO systems are able to optimise their use of energy.

See

RCO

Regenerative Catalytic Oxidation (RCO) systems are designed to eliminate Volatile Organic Compounds (VOCs) in medium and low flows (less than 10,000 Nm3/h), and for medium and low concentrations of VOCs (less than 5 g/Nm3).

RCO systems operate at a lower temperature, owing to the catalytic process that reduces the oxidation temperature from 850 ºC to 300 ºC.

See

A Direct Fired Thermal Oxidiser(DFTO) is designed to oxidise Volatile Organic Compounds (VOCs). DFTOs are most commonly used for flows contaminated by VOCs that are highly concentrated and/or have a high calorific value.

See

VOC concentrator

Zeolite rotor concentrators are used as a complement to RTO systems when the flow of gas to be treated is high and the concentration of solvents is low.

This method reduces the initial volume of polluted air that enters the RTO system while increasing the concentration of the pollutants the air contains. This makes it possible to use a smaller RTO system and achieve autothermal operating conditions.

See

NOx elimination

DeNOx systems are used to reduce the amount of nitrous oxides present in gas flows. The solutions available include Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR).

See

Baghouse filters

Baghouse filtersare devices that remove the solid particles suspended in gas flows by passing the gas through fabric.

They are used when highly efficient filtration is required, as they are able to eliminate submicronic particles with 99.9 % efficiency.

See

SCRUBBER

Scrubbers are devices that absorb compounds using an absorbent liquid, thereby “scrubbing” the gases that are emitted into the atmosphere. It is a non-destructive technology.

The most common application of scrubbers is where there are concentrations of acid or basic gases, which are usually generated in conjunction with Volatile Organic Compounds (VOCs) containing halogenated compounds that generate acids.

See

Active carbon filters

Active or activated carbon filtersare adsorption systems that capture and adsorb pollutants from the process gas by making the pollutants adhere to the solid phase.

These filters are ideal for minimizing VOC emissions in intermittent processes and for treating odours.

See

Tecam solutions. Design and technology adapted to meet your needs.

We offer tailor-made solutions adapted to suit each situation and each project. Our emissions treatment facilities are custom-designed and integrate seamlessly with your company’s production infrastructure.

This is because, at Tecam, we adapt to the idiosyncrasies of your facilities and your way of working, so your company can focus on what is most important to you: the productivity of your business.

DO YOU HAVE ANY CONCERNS REGARDING YOUR ENVIRONMENTAL MANAGEMENT?

VOC emissions treatment unit

The 7 most widely used technologies for emissions removal

Environmental sustainability is the only viable path for the future of the industry. The only possible answer is to implement technologies that combine maximum efficiency in eliminating emissions and waste with the highest efficiency in its implementation and use, in...
Petrochemical industry_factory skyline

Exhaust emissions and waste treatment in the Petrochemical sector

The petrochemical industry, and each refinery in particular, is unique and different in terms of process integration and the origin of raw materials. In that sense, you need to find an environmental expert who can provide you with customised environmental technology...
Tecam Gas Scrubber system

Wet and corrosive gases: how to eliminate them

Wet and corrosive gases are those containing acidic chemical compounds, for example, hydrogen chloride (HCl), hydrogen fluoride (HF), SOx, that can generate sulphuric acids (e.g. H2SO4) and bases (e.g. ammonia NH3). These gases must be duly treated and cleaned in...
Industrial dust particulate matter

Suspended dust and particles – the challenges of the particulate matter treatment

“Dust” is the generic term used for solid particles with a diameter of less than 500 micrometres, and in more general terms for the fine matter that is found suspended in the air. Commonly, dust is generated by industries that work with large amounts of solid...
Pharmaceutical sector_production

Emissions challenges of Pharma production processes

The pharmaceutical sector is a sector with high environmental risk. Emissions elimination in the pharma sector has become a critical issue in the recent decades. The excess of pollutants in the atmosphere derived from production processes brings consequences and...
blue sky with air balloon

International Day of Clean Air

The International Day of Clean Air for Blue Skies is celebrated each September 7th, and its main objective is to research, develop, improve and implement new practices that improve air quality to contribute to the well-being of the entire society. Air pollution is the...
Contact | Legal Information | Cookies | Privacy Policy | Whistleblower channel
Copyright Tecam 2020 | All rights reserved Powered by Elyc-B2B & Industrial Marketing